Seagate Hard Drive ST10000VE001 10TB SATA 3.5" SKYHAWK AI

MPN
ST10000VE001
Formatted (512 bytes/sector)
10TB
Guaranteed sectors
19,532,873,728
Heads
10
Discs
5
Bytes per logical sector
512
Bytes per physical sector
4096
Recording density, KBPI (Kb/in max)
2499
Track density, KTPI (ktracks/in, 0 skew)
487
Areal density, (Gb/in², at 0 skew mid-disk)
1215
Spindle speed (RPM)
7200
Internal data transfer rate (Mb/s max)
2169
Sustained data transfer rate OD (MiB/s max)
234 (245MB/s max)
I/O data-transfer rate (MB/s max)
600
ATA data-transfer modes supported
PIO modes 0 - 4
Multiword DMA modes 0 - 2
Ultra DMA modes 0 - 6
Cache buffer
256MB (262,144KB)
Average latency
4.16ms
Power-on to ready (sec) (typ/max)
23/30
Standby to ready (sec) (typ/max)
23/30
Startup current (typical) 12V (peak)
2.0A
Voltage tolerance (including noise)
5V +/-5%
12V +/-10%
Operating ambient temperature (min ^oC)
0^oC (Ambient)
Operating temperature (max ^oC)
65^oC (Drive Reported Temperature)
Non-Operating temperature
- 40^o to 70^oC (Ambient Temperature, see sections 2.6.1 and 2.10)
Temperature gradient (^oC per hour max)
20^oC (operating)
20^oC (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
20% per hour max
Altitude, operating
- 304.8 m to 3,048 m
( -1000 ft to 10,000+ ft)
Altitude, nonoperating (below mean sea level, max)
- 304.8 m to 12,192 m
(- 1000 ft to 40,000+ ft)
Operational Shock (max at 2 ms - typical)
Read 70 Gs / Write 40 Gs
Non-Operational Shock (max at 2 ms - typical)
300 Gs
Linear Random Operating Vibration
10 - 500 Hz: 1.04Grms
Random Rotary Operating Vibration
20 - 1500Hz: 12.5 rads/s²
Linear Random Non-Operating Vibration
10 - 500 Hz: 2.0 Grms ref
Drive acoustics, sound power (bels)
Idle
2.8 (typical)
3.0 (max)
During periods of drive idle, some offline activity may occur according to the SMART specification, which may increase acoustic and power to operational levels.
Performance seek
3.2 (typical)
3.4 (max)
Nonrecoverable read errors
1 sector per 10¹⁵ bits read
Annualized Failure Rate (AFR)
0.44% based on 8760 POH
Maximum Rated Workload
Maximum rate of less than 550TB/year
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reliability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on hours. Workload Rate is equal to TB transferred (8760 / recorded power on hours).
Load-unload cycles (command controlled)
300,000
Supports Hotplug operation per Serial ATA Revision 3.3 specification
Yes