Skip to content
Supermicro Motherboard MBD-X11SCA-B C246 Xeon-E/Core I7/I5/I3 S1151 ATX Bulk Pack
New
Supermicro Motherboard MBD-X11SCA-B C246 Xeon-E/Core I7/I5/I3 S1151 ATX Bulk Pack

Supermicro Motherboard MBD-X11SCA-B C246 Xeon-E/Core I7/I5/I3 S1151 ATX Bulk Pack

$334.99
SHARE
Physical Stats
Form Factor
ATX
Dimension
12" x 9.6" (30.48cm x 24.38cm)
Processor
CPU
Intel Xeon E-2100 Processor, Intel Xeon E-2200 Processor, 8th/9th Generation Intel Core i9/Core i7/Core i5/Core i3/Pentium/Celeron Processor
Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 95W TDP
System Memory
Memory Capacity
4 DIMM slots
Up to 128GB ECC/non-ECC UDIMM, DDR4-2666MHz
Memory Type
2666/2400/2133/1866/1600MHz SDRAM 72-bit, 288-pin
DIMM Sizes
1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
1.2V
On-Board Devices
Chipset
Intel C246
SATA
Intel C246 controller for 8 SATA3 (6 Gbps) ports RAID 0,1,5,10
Audio
ALC 888S HD Audio
Graphics
Intel UHD P630 graphic(For CPU Xeon E-21XXG/E-22XXG series only)
Network Controllers
Single LAN with Intel PHY I219LM LAN controller
Single LAN with Intel Ethernet Controller I210-AT, Support vPro
Input / Output
LAN
2 1GbE LAN ports
USB
4 USB 3.1 Gen1 port(s) (2 via header 2 rear type A)
4 USB 3.1 Gen2 port(s) (1 via header 1 rear type C 1 type A 1 rear type A)
2 USB 2.0 port(s) (2 via header)
Video Output
1 DP (DisplayPort) port(s), 1 HDMI port(s), 1 DVI - D port(s)
Serial Port
1 COM Port(s) (1 header)
DOM
1 SATA DOM (Disk on Module) power connector support
TPM
1 TPM Header
Expansion Slots
PCI-E
1 PCI-E 3.0 x4,
1 PCI-E 3.0 x1,
2 PCI-Ex16 slots are running at NA/16, or 8/8
1 - 5V PCI 32bit
M.2
M.2 Interface: 2 PCI-E 3.0 x4
Form Factor: 2242/2260/2280/22110
Key: M-Key
M.2 number1 are shared with PCI-Ex4 slot, M.2 number2 is shared with U.2
System BIOS
BIOS Type
128MB UEFI
Management
Software
SuperDoctor 5, AMT, vPro, Watchdog
System Management Software
SuperDoctor 5
Power Configurations
Power-on mode for AC power recovery, ACPI Power Management, ATX Power connector, Keyboard Wakeup from Soft-Off
PC Health Monitoring
Voltage
VBAT, Chipset Voltage, Chassis intrusion header, 5 -fan status, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages
LED
Standby alert LED
FAN
5 fans with tachometer status monitoring
Other Features
WOL, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector
Operating Environment
Operating Temperature Range
0oC - 50oC (32oF - 122oF)
Non-Operating Temperature Range
-20oC - 60oC (-4oF - 140oF)
Free standard domestic shipping.
Free 2-Day domestic shipping on orders over $200.
Free return shipping within the US. Find out more.