MPN SYS-6019P-WTR(5YR) Motherboard Super X11DDW-L Processor/Cache CPU Dual Socket P (LGA 3647) 2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, Dual UPI up to 10.4GT/s Support CPU TDP 70-165W Cores Up to 28 Cores Note Certain high frequency optimized CPUs within 165W TDP are not supported, such as Intel Gold 6144, 6146, 6244 and 6246. Note BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. System Memory Memory Capacity 12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel Optane DCPMM Memory Type 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info. On-Board Devices Chipset Intel C621 chipset SATA SATA3 (6Gbps) RAID 0, 1, 5, 10 Network Controllers Dual LAN with Gigabit Ethernet from C621 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Video ASPEED AST2500 BMC Input / Output SATA 4 SATA3 (6 Gbps) ports LAN 2 RJ45 Gigabit Ethernet ports 1 RJ45 Dedicated IPMI LAN port USB 4 USB 3.0 ports (rear) Video 1 VGA port DOM 2 SuperDOM (Disk on Module) ports System BIOS BIOS Type AMI 32Mb SPI Flash ROM Management Software Intel Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor 5 Watch Dog Power Configurations ACPI / APM Power Management PC Health Monitoring CPU Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator FAN Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment Thermal Control for fan connectors Chassis Form Factor 1U Rackmount Model CSE-815TQC-R706WB2 Available Colors Black Front Panel Buttons Power On/Off button UID button LEDs Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED Expansion Slots PCI-Express 2 PCI-E 3.0 x16 (FHHL) slots 1 PCI-E 3.0 x8 (LP) slot 1 PCI-E 3.0 x16 for Add-on-Module (AOM) 1 PCI-E 3.0 x4 NVMe M.2 slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) Drive Bays Hot-swap 4 Hot-swap 3.5" SATA3 drive bays Backplane SAS/SATA HDD Backplane System Cooling Fans 4 Counter-rotating 4cm PWM fans AC/DC240V Input Redundant Power Supply 700W/750W Redundant Power Supplies with PMBus Total Output Power 700W/750W Dimension (W x H x L) 54.5 x 40.25 x 320 mm Input 100 - 140Vac / 8 - 6A / 50-60Hz 200 - 240Vac / 4.5 - 3.8A / 50-60Hz 200 - 240Vdc / 4.5 - 3.8A (CCC Only) +12V Max: 58A / Min: 0.5A (100 - 140Vac) Max: 62A / Min: 0.5A (200 - 240Vac) Max: 62A / Min: 0.5A (200 - 240Vdc) (CB/CCC Only) +5V sb Max: 3A / Min: 0A Output Type Gold Finger Connector Mating with Molex 45984-4343 Certification Platinum Level Certified Operating Environment RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10oC - 35oC (50oF - 95oF) Non-operating Temperature: -40oC to 60oC (-40oF to 140oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
Returns for Refund
TheKeyKey.com provides a 30-day refund or replacement warranty for all products with the following exceptions listed below:
Any product not purchased from TheKeyKey.com.
Any product that is no longer in brand new, unopened condition.
Any product that has been installed or has attempted to be installed.
Any product that is returned to us without its original packaging, accessories, manuals, warranty cards, and all other items enclosed in the exact condition in which it was received.
Any product that exhibits physical damage either to the product itself or to the original packing materials and accessories.
Any product with a missing or altered serial number.
Any product that has been submitted for a promotional rebate.
Any product described as "not refundable" on the product details page.
Any custom-built systems manufactured by TheKeyKey.
Any special-order items.
Open-box and refurbished products are final-sale only and are not eligible for refund.
Please verify that your products are eligible for return before requesting an RMA number. Products not eligible for return will be shipped back to you.
Returns for Repair or Replacement
TheKeyKey.com provides a 30-day repair or replacement warranty. Please obtain an RMA number and follow the return instructions included with your number.
All defective, dead on arrival (DOA) items will be inspected and tested by our RMA department. If the item is tested to be in working condition, the RMA will be rejected and the item will be returned to you.
Some items are non-refundable and can only be exchanged for the exact same item. These items are described as "not refundable" on the product detail page.
Defective parts returned for replacement by TheKeyKey must be received within 30 days of the original invoice date. Items received by TheKeyKey after the initial 30-day period are no longer eligible for refund and will be forwarded to the original manufacturer for repair or replacement only, the choice of which will be at the discretion of the manufacturer. For repair or replacement inquiries after 30 days, please contact the manufacturer directly.
For product replacement or refund requests, please return the entire item package including all accessories. Package contents will be verified for completeness before a replacement / refund is issued.
Note that any physical damage will automatically void the product warranty and we will return any products that exhibit physical damage back to you. For example, we cannot accept CPU returns if the item is cracked, chipped, burnt, has bent pins or if the item has sustained any other type of physical damage. We highly recommend carefully reading the manufacturer's instructions before installing your product.
Please make sure that your item is actually defective and that you have ruled out other incompatibility possibilities before returning the product. When we receive the returned item, we must test it thoroughly to verify that it is actually defective because our suppliers (usually the manufacturer) will not accept returns or exchanges for working items. If we determine that the returned item is in working condition, we will ship it back to you.