MPN ES2486DC-2142IT-96G-US CPU Intel Xeon D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller CPU Architecture 64-bit x86 Floating Point Unit Yes Encryption Engine Yes (AES-NI) System Memory 48 GB RDIMM DDR4 ECC (4 x 4 GB+4 x 8GB) per controller Maximum Memory,br.512 GB (8 x 64GB) Memory Slot 8 x R-DIMM/LR-DIMM DDR4 IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory. Flash Memory 4GB (Dual boot OS protection) Drive Bay 24 x 2.5-inch SAS 12Gb/s, backward-compatible to SAS 6Gb/s Drive Compatibility 2.5-inch bays: 2.5-inch SAS/SATA hard disk drives 2.5-inch SAS/SATA solid state drives 1. When installing SATA HDD/SSD, QDA-SA3 adapter is required. 2. The QDA-SA3 adapter is designed for QNAP Enterprise ZFS NAS and allows the use of a SATA 6Gbps drive in a 2.5-inch SAS drive bay Hot-swappable Yes SSD Cache Acceleration Support Yes Read cache only Cache for Copy To Flash (C2F) 1 per each controller (64GB) Gigabit Ethernet Port (RJ45) 3 for each controller (one for remote management) 10 Gigabit Ethernet Port 4 x 10GbE SFP+ for each controller Wake on LAN (WOL) Yes Jumbo Frame Yes PCIe Slot 2 Slot 1: PCIe Gen 3 x8 (CPU) Slot 2: PCIe Gen 3 x8 (CPU) USB 3.2 Gen 1 port 2 per each controller Form Factor 2U Rackmount LED Indicators System Power LED (Green): on/off System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection Buttons Power, Reset Operating temperature 0 - 40 oC (32oF - 104oF) Relative Humidity 5-95% RH non-condensing, wet bulb: 27oC (80.6oF) Power Supply Unit Redundant/ Hot Swap Power Vin:90-264VAC700W Power Consumption: Operating Mode, Typical 579.59 W Tested with drives fully populated. Fan Hot-swappable fan module (60x60x38mm 16000RPM/12v/2.8A x 3) Sound Level 60.9 db(A) System Warning Buzzer Max. Number of Concurrent Connections (CIFS) 1500 Safety Standard FCC Class A (USA only) CE Mark ( EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD
Returns for Refund
TheKeyKey.com provides a 30-day refund or replacement warranty for all products with the following exceptions listed below:
Any product not purchased from TheKeyKey.com.
Any product that is no longer in brand new, unopened condition.
Any product that has been installed or has attempted to be installed.
Any product that is returned to us without its original packaging, accessories, manuals, warranty cards, and all other items enclosed in the exact condition in which it was received.
Any product that exhibits physical damage either to the product itself or to the original packing materials and accessories.
Any product with a missing or altered serial number.
Any product that has been submitted for a promotional rebate.
Any product described as "not refundable" on the product details page.
Any custom-built systems manufactured by TheKeyKey.
Any special-order items.
Open-box and refurbished products are final-sale only and are not eligible for refund.
Please verify that your products are eligible for return before requesting an RMA number. Products not eligible for return will be shipped back to you.
Returns for Repair or Replacement
TheKeyKey.com provides a 30-day repair or replacement warranty. Please obtain an RMA number and follow the return instructions included with your number.
All defective, dead on arrival (DOA) items will be inspected and tested by our RMA department. If the item is tested to be in working condition, the RMA will be rejected and the item will be returned to you.
Some items are non-refundable and can only be exchanged for the exact same item. These items are described as "not refundable" on the product detail page.
Defective parts returned for replacement by TheKeyKey must be received within 30 days of the original invoice date. Items received by TheKeyKey after the initial 30-day period are no longer eligible for refund and will be forwarded to the original manufacturer for repair or replacement only, the choice of which will be at the discretion of the manufacturer. For repair or replacement inquiries after 30 days, please contact the manufacturer directly.
For product replacement or refund requests, please return the entire item package including all accessories. Package contents will be verified for completeness before a replacement / refund is issued.
Note that any physical damage will automatically void the product warranty and we will return any products that exhibit physical damage back to you. For example, we cannot accept CPU returns if the item is cracked, chipped, burnt, has bent pins or if the item has sustained any other type of physical damage. We highly recommend carefully reading the manufacturer's instructions before installing your product.
Please make sure that your item is actually defective and that you have ruled out other incompatibility possibilities before returning the product. When we receive the returned item, we must test it thoroughly to verify that it is actually defective because our suppliers (usually the manufacturer) will not accept returns or exchanges for working items. If we determine that the returned item is in working condition, we will ship it back to you.