MPN DS-2CD2165G0-I 6MM Camera Image Sensor: 1/2.4" Progressive Scan CMOS Signal System: PAL/NTSC Min. Illumination: Color: 0.008 Lux at (F1.2, AGC ON), 0.014 Lux at (F1.6, AGC ON) Shutter time: 1/3 s to 1/100,000 s Slow shutter: Support Lens: 6 mm, horizontal FOV: 60o, vertical FOV: 38o Lens Mount: M12 Adjustment Range: Pan: 0o to 355o, tilt: 0o to 75o, rotate: 0o to 355o Day and Night: IR cut filter with auto switch Wide Dynamic Range: 120 dB Digital noise reduction: 3D DNR Focus: Fixed
Compression Standard Video Compression: H.265+/H.265/H.264+/H.264/MJPEG Video bit rate: 32Kbps to 16Mbps
Image Max. Image Resolution: 3072 x 2048 Frame Rate: 50Hz: 20 fps (3072 x 2048, 3072 x 1728, 2944 x 1656), 25 fps (2560 x 1440, 1920 x 1080, 1280 x 720) 60Hz: 20 fps (3072 x 2048, 3072 x 1728, 2944 x 1656), 30 fps (2560 x 1440, 1920 x 1080, 1280 x 720) Sub Stream: 50Hz: 25fps (640 x 480, 640 x 360, 320 x 240) 60Hz: 30fps (640 x 480, 640 x 360, 320 x 240) Third Stream: 50Hz: 25fps (1280 x 720, 640 x 360, 352 x 288) 60Hz: 30fps (1280 x 720, 640 x 360, 352 x 240) Image Enhancement: BLC/3D DNR Image Settings: Rotate mode, saturation, brightness, contrast, sharpness and white balance adjustable by client software or web browser ROI: Support 1 fixed region for main stream and sub stream separately
Interface Communication Interface: 1 RJ45 10M/100M self-adaptive Ethernet port On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB Reset Button: Yes
Smart Feature-set Behavior Analysis: Line crossing detection, intrusion detection, unattended baggage detection, object removal detection Line Crossing Detection: Cross a pre-defined virtual line Intrusion Detection: Enter and loiter in a pre-defined virtual region Region Entrance: Enter a pre-defined virtual region from the outside place Region Exiting: Exit from a pre-defined virtual region Exception Detections: Scene change detection
General Operating Conditions: -30oC to 60oC (-22oF to 140oF) Humidity 95% or less (non-condensing) Power Supply: 12 VDC +/- 25%, 5.5 mm coaxial power plug ,PoE (802.3af, class 3) Power Consumption: 12 VDC, 0.5 A, max: 6 W PoE: (802.3af, 36 VDC to 57 VDC), 0.2 A to 0.1 A, max: 7.5 W Weather Proof: IP67 IR Range: Up to 30m
Returns for Refund
TheKeyKey.com provides a 30-day refund or replacement warranty for all products with the following exceptions listed below:
Any product not purchased from TheKeyKey.com.
Any product that is no longer in brand new, unopened condition.
Any product that has been installed or has attempted to be installed.
Any product that is returned to us without its original packaging, accessories, manuals, warranty cards, and all other items enclosed in the exact condition in which it was received.
Any product that exhibits physical damage either to the product itself or to the original packing materials and accessories.
Any product with a missing or altered serial number.
Any product that has been submitted for a promotional rebate.
Any product described as "not refundable" on the product details page.
Any custom-built systems manufactured by TheKeyKey.
Any special-order items.
Open-box and refurbished products are final-sale only and are not eligible for refund.
Please verify that your products are eligible for return before requesting an RMA number. Products not eligible for return will be shipped back to you.
Returns for Repair or Replacement
TheKeyKey.com provides a 30-day repair or replacement warranty. Please obtain an RMA number and follow the return instructions included with your number.
All defective, dead on arrival (DOA) items will be inspected and tested by our RMA department. If the item is tested to be in working condition, the RMA will be rejected and the item will be returned to you.
Some items are non-refundable and can only be exchanged for the exact same item. These items are described as "not refundable" on the product detail page.
Defective parts returned for replacement by TheKeyKey must be received within 30 days of the original invoice date. Items received by TheKeyKey after the initial 30-day period are no longer eligible for refund and will be forwarded to the original manufacturer for repair or replacement only, the choice of which will be at the discretion of the manufacturer. For repair or replacement inquiries after 30 days, please contact the manufacturer directly.
For product replacement or refund requests, please return the entire item package including all accessories. Package contents will be verified for completeness before a replacement / refund is issued.
Note that any physical damage will automatically void the product warranty and we will return any products that exhibit physical damage back to you. For example, we cannot accept CPU returns if the item is cracked, chipped, burnt, has bent pins or if the item has sustained any other type of physical damage. We highly recommend carefully reading the manufacturer's instructions before installing your product.
Please make sure that your item is actually defective and that you have ruled out other incompatibility possibilities before returning the product. When we receive the returned item, we must test it thoroughly to verify that it is actually defective because our suppliers (usually the manufacturer) will not accept returns or exchanges for working items. If we determine that the returned item is in working condition, we will ship it back to you.