MPN CP.ZM.00000008.02 Built-In Functions Operation Modes -Underslung Mode -Upright Mode -Briefcase Mode -Handheld, Car Mount, Aerial, Tripod, Steadicam Mode Built-in, independent IMU module DJI Advanced 32-Bit ARM Processor DJI Specialized Gimbal Drive Motors with Encoders Dual Battery System Bluetooth Module D-Bus Receiver Supported 2.4 GHz/5.8 GHz Receiver Temperature Sensors Built-in Touch Panel Built-in GPS USB Type-C Connection Power and Video Signal through Slip Ring Working Current Static current: 300 mA (at 22.8 V) Dynamic current: 500 mA (at 22.8 V) Locked motor current: Max 15 A (at 22.8 V) Run Time 8 hours 2.5 hours (when powering gimbal, camera and accessories at the same time) Operating Temperature -4oF - 122oF (-20oC - 50oC) Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 245 mm Maximum height measured from top of the camera base plate: 165 mm Maximum width: 180 mm Accessory Power Connections 14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A) GCU Input Power Intelligent Battery: 4280 mAh-22.8 V Connections 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, US Type-C PC Assistant Software Requirements Windows 7 or above, Mac OS X 10.11 or above Mobile Assistant Software Requirements iOS 9 or above, Android 4.4 or above Load Weight (Reference Value) 30 lbs (13.6 kg) Angular Vibration Range +/- 0.02o Maximum Controlled Rotation Speed Pan axis: 400o/s Tilt axis: 360o/s Roll axis: 360o/s Mechanical Endpoint Range Pan axis control: 360o continuous rotation Tilt axis control: +/-135o Roll axis control: +/-220o Controlled Rotation Range Pan axis control: 360o continuous rotation Tilt axis control: +45o to -135o Roll axis control: +/-45o in the box DJI Ronin 2 Gimbal Grip Remote Controller 2 x TB50 Intelligent Batteries Dual TB50 Battery Mount Battery Charger Quad Charging Hub Battery Charger Power Cable Ronin 2 Power Hub Protective Case Hex Tool Camera Top Cross Bar Camera Base Plate Accessory Mount 2 x 15mm Rod 15mm Focus Rod Mount Ronin 2 Universal Mount Top Mounting Block MotionBlock ARRI ALEXA Mini Power Cable ARRI ALEXA Mini Start/Stop Cable RED Power Cable RED RCP Control Cable Ronin 2 Power Cable 2-Pin Power Cable DC Power Cable Triple D-Tap Breakout Box SDI-In Cable SDI-Out Cable USB Type-C Data Cable UART to D-BUS Cable
Returns for Refund
TheKeyKey.com provides a 30-day refund or replacement warranty for all products with the following exceptions listed below:
Any product not purchased from TheKeyKey.com.
Any product that is no longer in brand new, unopened condition.
Any product that has been installed or has attempted to be installed.
Any product that is returned to us without its original packaging, accessories, manuals, warranty cards, and all other items enclosed in the exact condition in which it was received.
Any product that exhibits physical damage either to the product itself or to the original packing materials and accessories.
Any product with a missing or altered serial number.
Any product that has been submitted for a promotional rebate.
Any product described as "not refundable" on the product details page.
Any custom-built systems manufactured by TheKeyKey.
Any special-order items.
Open-box and refurbished products are final-sale only and are not eligible for refund.
Please verify that your products are eligible for return before requesting an RMA number. Products not eligible for return will be shipped back to you.
Returns for Repair or Replacement
TheKeyKey.com provides a 30-day repair or replacement warranty. Please obtain an RMA number and follow the return instructions included with your number.
All defective, dead on arrival (DOA) items will be inspected and tested by our RMA department. If the item is tested to be in working condition, the RMA will be rejected and the item will be returned to you.
Some items are non-refundable and can only be exchanged for the exact same item. These items are described as "not refundable" on the product detail page.
Defective parts returned for replacement by TheKeyKey must be received within 30 days of the original invoice date. Items received by TheKeyKey after the initial 30-day period are no longer eligible for refund and will be forwarded to the original manufacturer for repair or replacement only, the choice of which will be at the discretion of the manufacturer. For repair or replacement inquiries after 30 days, please contact the manufacturer directly.
For product replacement or refund requests, please return the entire item package including all accessories. Package contents will be verified for completeness before a replacement / refund is issued.
Note that any physical damage will automatically void the product warranty and we will return any products that exhibit physical damage back to you. For example, we cannot accept CPU returns if the item is cracked, chipped, burnt, has bent pins or if the item has sustained any other type of physical damage. We highly recommend carefully reading the manufacturer's instructions before installing your product.
Please make sure that your item is actually defective and that you have ruled out other incompatibility possibilities before returning the product. When we receive the returned item, we must test it thoroughly to verify that it is actually defective because our suppliers (usually the manufacturer) will not accept returns or exchanges for working items. If we determine that the returned item is in working condition, we will ship it back to you.