MPN 70SB181000000 Interface / Power USB Type-C USB Bus Powered DAC Specs Dynamic Range (Stereo): 115 dB THD+N (Stereo): 0.0004% Playback Resoluton Stereo PCM 16-bit, 48.0, 96.0, 192.0 kHz PCM 24-bit, 48.0, 96.0, 192.0 kHz PCM 32-bit, 48.0, 96.0, 192.0 kHz Surround 7.1 PCM 16-bit, 48.0, 96.0, 192.0 kHz PCM 24-bit, 48.0, 96.0, 192.0 kHz PCM 32-bit, 48.0, 96.0, 192.0 kHz Optical Output PCM 16-bit, 48.0, 96.0, 192.0 kHz PCM 24-bit, 48.0, 96.0, 192.0 kHz Dolby Digital Live 16-bit, 48.0 kHz ADC Specs Dynamic Range: 104 dB THD+N: 0.0017% Recording Resoluton Mic-in 16-bit, 48.0, 96.0, 192.0 kHz 24-bit, 48.0, 96.0, 192.0 kHz Line-in 16-bit, 48.0, 96.0, 192.0 kHz 24-bit, 48.0, 96.0, 192.0 kHz What U Hear 16-bit, 48.0, 96.0, 192.0 kHz 24-bit, 48.0, 96.0, 192.0 kHz Headphone Amp Output Impedance: 10OHM Supported Headphone Impedance: 32OHM - 600OHM Low Gain: 32 - 149OHM (1.2V RMS at 32OHM, 1.5V RMS at 150OHM) High Gain: 150 - 600OHM (2.3V RMS at 150OHM, 2.9V RMS at 600OHM) Connectivity 1 x 1/8" Front Out Jack 1 x 1/8" Rear Out Jack 1 x 1/8" Center / Subwoofer Out Jack 1 x 1/8" Side Out Jack 1 x TOSLINK Optical Out 1 x 1/8" Headphone Jack 1 x 1/8" Ext. Mic In Jack 1 x 1/8" Line In Jack 1 x USB Type-C port for PC / Mac Software
Windows Sound Blaster Command Sound Blaster X3 WHQL and ASIO drivers Download at creative.com/support/SBX3 Mac Sound Blaster Command Sound Blaster X3 driver Download at creative.com/support/SBX3 PS4 / Nintendo Switch Sound Blaster Command for Android / iOS Download from Android Playstore / Apple Appstore Minimum System Requirement Windows OS Intel CoreTMi3 or AMD equivalent processor Intel, AMD or 100% compatible motherboard Microsoft Windows 10 32 / 64-bit, Windows 8.1 / 8.0 32 / 64-bit, Windows 7 32 / 64-bit 1GB RAM >600 MB of free hard disk space USB 2.0 / USB 3.0 port Mac OS Mac OS X 10.9 or higher 1 GB RAM USB 2.0 / USB 3.0 port PS4 Firmware Version 5.0 or later Available USB port Nintendo Switch Switch OS 5.0 or later Available USB port (in docking mode) Voice communications is title dependent Android Android OS Version 7.0 or later Device must have built-in Bluetooth Low Energy (BLE) support iOS iOS Version 11.0 or later Device must have built-in Bluetooth Low Energy (BLE) support
Returns for Refund
TheKeyKey.com provides a 30-day refund or replacement warranty for all products with the following exceptions listed below:
Any product not purchased from TheKeyKey.com.
Any product that is no longer in brand new, unopened condition.
Any product that has been installed or has attempted to be installed.
Any product that is returned to us without its original packaging, accessories, manuals, warranty cards, and all other items enclosed in the exact condition in which it was received.
Any product that exhibits physical damage either to the product itself or to the original packing materials and accessories.
Any product with a missing or altered serial number.
Any product that has been submitted for a promotional rebate.
Any product described as "not refundable" on the product details page.
Any custom-built systems manufactured by TheKeyKey.
Any special-order items.
Open-box and refurbished products are final-sale only and are not eligible for refund.
Please verify that your products are eligible for return before requesting an RMA number. Products not eligible for return will be shipped back to you.
Returns for Repair or Replacement
TheKeyKey.com provides a 30-day repair or replacement warranty. Please obtain an RMA number and follow the return instructions included with your number.
All defective, dead on arrival (DOA) items will be inspected and tested by our RMA department. If the item is tested to be in working condition, the RMA will be rejected and the item will be returned to you.
Some items are non-refundable and can only be exchanged for the exact same item. These items are described as "not refundable" on the product detail page.
Defective parts returned for replacement by TheKeyKey must be received within 30 days of the original invoice date. Items received by TheKeyKey after the initial 30-day period are no longer eligible for refund and will be forwarded to the original manufacturer for repair or replacement only, the choice of which will be at the discretion of the manufacturer. For repair or replacement inquiries after 30 days, please contact the manufacturer directly.
For product replacement or refund requests, please return the entire item package including all accessories. Package contents will be verified for completeness before a replacement / refund is issued.
Note that any physical damage will automatically void the product warranty and we will return any products that exhibit physical damage back to you. For example, we cannot accept CPU returns if the item is cracked, chipped, burnt, has bent pins or if the item has sustained any other type of physical damage. We highly recommend carefully reading the manufacturer's instructions before installing your product.
Please make sure that your item is actually defective and that you have ruled out other incompatibility possibilities before returning the product. When we receive the returned item, we must test it thoroughly to verify that it is actually defective because our suppliers (usually the manufacturer) will not accept returns or exchanges for working items. If we determine that the returned item is in working condition, we will ship it back to you.